In this post,let's go through the different changes that have to be performed in order to "configure the processor".
1. Create a project( I call mine "trial")
2. As I have multiple projects open,its good to double click on trial to make sure that the processor does these changes to trial and not my previous projects.
Once System oscillator 0 is enabled,you will be bombarded by yellow and red colored warnings.
It's nothing to worry about.Once the changes shown below are performed,the warnings will go.
Congratulations.You are done configuring your processor.
One more thing:The following steps are not mandatory but are advisable to perform as they will help rid us of any unseen/unknown bugs in the future.
1. Create a project( I call mine "trial")
2. As I have multiple projects open,its good to double click on trial to make sure that the processor does these changes to trial and not my previous projects.
Once System oscillator 0 is enabled,you will be bombarded by yellow and red colored warnings.
It's nothing to worry about.Once the changes shown below are performed,the warnings will go.
Congratulations.You are done configuring your processor.
One more thing:The following steps are not mandatory but are advisable to perform as they will help rid us of any unseen/unknown bugs in the future.
No comments:
Post a Comment